A.changing filter elements would not interrupt engine operation
B.filtering occurs twice in each pass of oil through the system
C.clogging will not occur
D.dropping pressure is half of that through a single filter unit
您可能感興趣的試卷
你可能感興趣的試題
A.decrease in maximum cylinder pressure
B.increase in ignition lag
C.decrease in fuel consumption per horsepower-hour
D.decrease in exhaust manifold pressure
A.low voltage trip to trip
B.reverse power trip to trip
C.damage to windings
D.excessive exhaust temperatures
A.ensure penetration and distribution of the fuel in the combustion chamber
B.ensure the needle valve is flushed clean during each injection
C.prevent combustion gas blowback into the open needle valve
D.prevent reflected pressure waves when the needle valve closes
A.slightly less than atmospheric pressure
B.approximately equal to exhaust manifold pressure at all times
C.that is widely fluctuating constantly
D.decreasing as engine load increases
A.volute pump
B.centrifugal pump
C.diaphragm pump
D.gear pump
最新試題
A thrust bearing is used with a propulsion diesel engine to ().
If the main engine of an unattended engine room shuts down automatically, it will be indicated by an alarm ().
In a simple mechanical governor, the ().
In using reduction gears to obtain efficient propeller speeds, ().
Lube oil cannot be efficiently filtered if its ().
If the water level dropped rapidly in the expansion tank of a closed diesel engine cooling water system, you should suspect a ().
Engine protection by means of an alarm or shutdown control can be obtained with devices that are sensitive to ().
Lube oil filters remove contaminants more efficiently if the oil being filtered is ().
For a given size engine, the two-stroke/cycle diesel engine will deliver more power than a four-stroke/cycle diesel engine because ().
An automated diesel engine should normally shut down due to ()