A.bleeding refrigerant from the condenser
B.opening a drain petcock on the oil separator
C.condensing the water in the heat exchanger
D.using a dehydrator cartridge
您可能感興趣的試卷
你可能感興趣的試題
A.drill holes through the heavy side of the impeller until it balances
B.weld counterweights to the light side of the impeller
C.remove metal from the heavy side by machining in a lathe
D.acid wash and serape the heavy side until it balances
A.cause loss of hydraulic oil from the system
B.result in extreme damage to the pump
C.cause damage to the pump ff not continually drained from the pump casing
D.result in the system high side pressure to substantially drop off
A.saltwater heater shell
B.second-stage condenser
C.atmosphere
D.second-stage flash chamber
A.Ash content, carbon residue, and gravity
B.Viscosity, acidity, and demulsibility
C.Pour point, flash, point, and precipitation number
D.Auto-ignition point, viscosity index, and film strength
A.Protects against suction valve float
B.Provides a positive pressure on the air inlet valves
C.Prevents lubricating oil contamination of the compressed air supply
D.Protects against the damaging effects of airborne solid particles
最新試題
An increasing head pressure in a refrigeration system, without any corresponding change in the cooling water inlet temperature, would probably be caused by ().
When a refrigeration compressor has developed a high head pressure as a result of a refrigerant overcharge, you should ().
The general purpose of a heat exchanger is to ().
The amount of fluid friction or internal friction inherent in a mineral lubricating oil is reflected as a measure of its ().
If the viscosity of the liquid being transferred remains constant as the discharge pressure increases, the rotary pump ().
Who is responsible for ensuring that someone is assigned to close the watertight doors in an emergency?()
If the relief valve on the discharge side of a hydraulic pump lifts, the cause could be ().
If the thermal bulb of an expansion valve is incorrectly placed at the center of the coil instead of the end, it will ().
The major source of chemical contaminants in hydraulic fluid is ().
A salinity indicator is used to determine the ().