A.Move bodily to port
B.Move bodily to starboard
C.Move in a zig-zag motion
D.Steer a fairly straight course
您可能感興趣的試卷
你可能感興趣的試題
A.Abreast the heel
B.At right angles to the boom when viewed from above
C.Aft of the heel
D.Forward of the spiderband
A.Effect of the propeller flow on the rudders
B.Water flow due to the vessel's movement through the water
C.Tunnel affect of the water flow past opposing rudders
D.Discharge current being channeled to impinge on the vessel's deadwood
A.wooden blocks or dunnage placed between a deck load and the deck
B.the chains and shackles used to secure a deck cargo
C.a crate in which a deck cargo is packaged
D.cardboard separation pieces placed between deck loads to prevent chafing
A.one
B.two
C.three
D.four
A.Right-hand laid
B.Cable-laid
C.Sennet-laid
D.Water-laid
最新試題
When rigging a bosun’s chair，a tail block or lizard is used to（）.
At least（）radar transponder shall be carried on each side of every cargo ship of 500 gross tonnage and upwards.
Serving is（）.
A spanner is a（）.
The ladder shall（）.
An intermediate spring is（）.
When paying out nylon line from around the bitts（）.
The Vessel is a（）bulk carrier which is permitted to carry grain in bulk without requiring any fittings under the Rules of the 1974 International Safety of Life at Sea Convention.
In the manufacture of wire rope，if the wires are shaped to conform to the curvature of the finished rope before they are laid up，the rope is called（）.
Which of the following statements concerning the rigging of bosuns’ chairs and their use is TRUE（）.