A.during the valve overlap period
B.with only the exhaust valve open
C.at a pressure below atmospheric
D.without cooling the cylinders or pistons
您可能感興趣的試卷
你可能感興趣的試題
A.excessive piston to liner clearance
B.excessive dirt beneath the piston crown that reduces heat transfer
C.faulty nozzle spray
D.all of the above
A.an increased flash point
B.higher lube oil pressures
C.an increased viscosity
D.lower lube oil pressures
A.The fuel metering will vary
B.The fuel will explode
C.The cylinder head will crack
D.The engine will stop
A.Leaking fuel injectors
B.Lower than normal compression
C.Delayed fuel injection
D.All of the above are correct
A.Quantity of fuel injected tends to be decreased
B.Quantity of fuel injected will always be increased
C.Start of injection tends to be advanced
D.Duration of injection will always greater
最新試題
（） is not installed on the main switchboar.
Which one is NOT the ‘clear grounds’ for a more detailed inspection?（）
The main purpose of port State control is not to（）
The additional mark （）in the Classification Certificate for Machinery means propulsion apparatus is remotely controlled on the navigating bridge control station, and engine assembly control station is unmanned periodically.
Which of the following items don’t belong to dock repair works?（）
Using a file without a handle may result in （）
To shut down a diesel engine after it exceeds the set maximum speed，which type of device listed should be used?（）
By comparing the exhaust gas temperature of each cylinder, the operator can determine if the load is balanced throughout the engine. The device most commonly used is a（）
The ISPS Code consists of a mandatory section-Part A, which shows（）
When does auxiliary burner of incinerator put into operation? （）Ⅰ. start incinerator when it is coldⅡ. the sludge for dealing with is littleⅢ. the sludge for dealing with is largeⅣ. the water and impurity in sludge are too muchⅤ. the temperature in incinerator is lowⅥ. dealing with little solid rubbish