A.Too much sludge accumulated in separator bowl
B.Diameter of gravity disc too large
C.High level tank lack of water
D.Oil input too rapidly
您可能感興趣的試卷
你可能感興趣的試題
A.Oil temperature too high
B.Diameter of gravity disc too large
C.Oil temperature too low
D.High level tank out of water
A.Oil inlet valve opening too quickly
B.Oil temperature too high
C.Diameter of gravity disc too small
D.Viscosity of oil too low
A.cut off the power
B.cut off the oil inlet
C.open guide water valve
D.close oil outlet value
A.acid
B.sludge
C.mechanical impurity
D.salinity
A.too little seal water
B.improper gravity disc
C.oil discharging pump not working very well
D.low water level of the working water
最新試題
（） is not installed on the main switchboar.
The cetane rating of diesel fuel is an indication of the （）
The ISPS Code consists of a mandatory section-Part A, which shows（）
One of the reasons that cause oil flowed from sludge outlet of a self-cleaning separator is（）
（）connectors hold best if a wire is accidentally pulled or a connection becomes loose.
To proceed to the assistance of a ship in distress is（）
（）are used to digest the sewage to produce innocuous sludge in a biological sewage treatment plant.
When does auxiliary burner of incinerator put into operation? （）Ⅰ. start incinerator when it is coldⅡ. the sludge for dealing with is littleⅢ. the sludge for dealing with is largeⅣ. the water and impurity in sludge are too muchⅤ. the temperature in incinerator is lowⅥ. dealing with little solid rubbish
To shut down a diesel engine after it exceeds the set maximum speed，which type of device listed should be used?（）
The condensers located in various stages of a flash evaporator are cooled by（）