A.the relief valve should open before the high-pressure cutout
B.the relief valve should open and let excess refrigerant go to receiver
C.the high-pressure cutout switch should operate before the relief valve opens
D.close in on the suction valve
您可能感興趣的試卷
你可能感興趣的試題
A.finished joints
B.welded joints
C.ground joints
D.soldered joints
A.a clogged scale trap
B.air in the system
C.automatic controls not functioning properly
D.insufficient cooling water to the condenser
A.separating chamber
B.system of baffles
C.purge valve
D.vacuum reducing valve
A.saltwater side of the condenser
B.refrigerant side of the condenser
C.in the evaporator coils
D.in the suction strainer
A.cutout
B.pressure controller
C.controller switch
D.cutout switch
最新試題
（） is not installed on the main switchboar.
The additional mark （）in the Classification Certificate for Machinery means propulsion apparatus is remotely controlled on the navigating bridge control station, and engine assembly control station is unmanned periodically.
（）connectors hold best if a wire is accidentally pulled or a connection becomes loose.
For a given exhaust gas boiler, what is the quantity of its evaporation mainly determined?（）
Which one is NOT the ‘clear grounds’ for a more detailed inspection?（）
Thermostatic steam pressure reducing valves are used in the fuel oil service system to control the（）
The main purpose of port State control is not to（）
To shut down a diesel engine after it exceeds the set maximum speed，which type of device listed should be used?（）
“Insufficiency of manning or insufficiency of certification of seafarers” is an identification of a（）
The flash point of a residual fuel oil should be used to determine the highest temperature to which oil may be heated（）