A.be turned by a turning gear for at least one minute
B.be turned by a turning gear for at least two minutes
C.be turned at least one complete turn
D.be turned at least two complete turns
您可能感興趣的試卷
你可能感興趣的試題
A.the lubricating pumps are stopped and the access doors are opened
B.the lubricating pumps are running and the access doors are opened
C.the engine is running and the access doors are closed
D.the engine is stopped and the access doors are closed
A.should be kept at a proper level by a cooler
B.should be raised to about 80℃ by a heater
C.should be raised gradually
D.should be lowered to about 60℃
A.operational
B.open
C.closed securely
D.at middle position
A.instigating corrective action
B.indicating values of controlled variables
C.warning of off-limit conditions
D.providing record of performance
A.which governs the state of a variable
B.which provides a visual and audible alarm
C.which indicates values of controlled variables
D.which measures the state of the controlled variable
最新試題
The condensers located in various stages of a flash evaporator are cooled by（）
A purge recovery system is used in a centrifugal air conditioning or refrigeration system to （）
The cetane rating of diesel fuel is an indication of the （）
One of the reasons that cause oil flowed from sludge outlet of a self-cleaning separator is（）
Thermostatic steam pressure reducing valves are used in the fuel oil service system to control the（）
Diesel engine air start system check valves are opened by （）
The ISPS Code consists of a mandatory section-Part A, which shows（）
Flame failure in an automatically fired auxiliary boiler can from a/an （）
“Insufficiency of manning or insufficiency of certification of seafarers” is an identification of a（）
By comparing the exhaust gas temperature of each cylinder, the operator can determine if the load is balanced throughout the engine. The device most commonly used is a（）