A.only when fully loaded
B.if one or more tanks are full
C.when transferring cargo
D.only when the barge is being towed
您可能感興趣的試卷
你可能感興趣的試題
A.the CO2 being inhaled by personnel
B.reflash of burning liquids
C.vapor condensation on the extinguisher
D.the discharge causing a static spark
A.opening dead spaces to check for heat or fire
B.evacuation of the vessel
C.sounding the all clear signal
D.operation of the emergency generator
A.release CO2 to the protected space
B.secure all mechanical ventilation in the protected space
C.sound the rig's general alarm signal for a fire
D.sound an alarm in the ballast control room
A.cannot be made with salt water
B.is heavier than oil and sinks below its surface
C.is corrosive and a hazard to fire fighters
D.conducts electricity
A.it can break down under high heat and emit noxious fumes
B.it will decompose under prolonged storage and lose its effectiveness
C.fire has been known to flash back over the surface of an oil fire
D.it is ineffective in fighting fires in high-voltage electrical equipment
最新試題
The best method of extinguishing a class A fire is to().
The disadvantage of using CO2 is that the().
Removing which will extinguish a fire?().
Small quantities of flammable liquids needed at a work site should be().
On a ship,a fire drill shall be conducted once every().
The BEST method of applying foam to a fire is to().
One disadvantage of using regular dry chemical (sodium bicarbonate) in firefighting is that().
Recharging a previously used cartridge-operated dry-chemical extinguisher is accomplished by().
Portable foam type fire extinguishers are most effective on().
The discharge side of every fire pump must be equipped with a().