單項選擇題What is the effect of the following access list condition access-list 101 permit ip 10.25.30.0 0.0.0.255 any()。

A.permit all packets matching the first three octets of the source address to all destinations
B.permit all packets matching the last octet of the destination address and accept all source addresses
C.permit all packets from the third subnet of the network address to all destinations
D.permit all packets matching the host bits in the source address to all destinations
E.permit all packets to destinations matching the first three octets in the destination address


您可能感興趣的試卷

你可能感興趣的試題

1.單項選擇題Which IPV6 routing protocol uses multicast group FF02::9 to send updates?()

A.RIPng
B.OSPFv3
C.static
D.IS-ISfor IPv6

2.單項選擇題

根據下圖,R1能通告給R2的最有效的匯總是?()

A.172.1.0.0/22
B.172.1.0.0/21
C.172.1.4.0/22
D.172.1.4.0/24  172.1.5.0/24  172.1.6.0/24  172.1.7.0/24
E.172.1.4.0/25  172.1.4.128/25  172.1.5.0/24  172.1.6.0/24  172.1.7.0/24

3.多項選擇題What are three IPv6 transition mechanisms?()

A.6to4 tunneling
B.VPN tunneling
C.GRE tunneling
D.ISATAP tunneling
E.PPP tunneling
F.Teredo tunneling

4.單項選擇題Given the output of the Floor3 switch, what statement describes the operation of this switch()。

A.VTP is disabled on this switch.
B.The switch can create, change, and delete VLANs.
C.The switch learns VLAN information but does not save it to NVRAM.
D.The switch can create VLANs locally but will not forward this information to other switches.
E.The switch learns VLAN information and updates the local VLAN data base in NVRAM.

5.單項選擇題Running both IPv4 and IPv6 on a router simultaneously is known as what?()

A.4to6 routing
B.6to4 routing
C.binary routing
D.dual-stack routing
E.NextGen routing

最新試題

請參見圖示。圖中所示路由表所屬的PC 已正確配置。IP 地址192.168.1.254屬于哪一個網絡設備或接口?()

題型:單項選擇題

要將數據包發送到遠程網絡,應使用哪種設備?()

題型:單項選擇題

請參見圖示。網絡中的所有設備均使用默認配置。此拓?fù)渲写嬖诙嗌賯€(gè)廣播域?()

題型:單項選擇題

請參見圖示。主機A 和B 無法互相通信。此問題的原因是什么?()

題型:單項選擇題

請參見圖示。網絡技術人員使用圖中所示的連接將主機A 連接到路由器以創建初始配置。下列有關此連接的陳述中哪一項正確?()

題型:單項選擇題

OSI 哪一層可提供有序的數據重構服務?()

題型:單項選擇題

何時必須使用clock rate 命令配置路由器串行接口?()

題型:單項選擇題

請參見圖示。某用戶想要查看當前的配置。圖中所示為ipconfig/all 命令的輸出。從此輸出可以得到哪三項結論?()

題型:多項選擇題

請參見圖示。主機B 嘗試與主機C 建立TCP/IP 會話。在嘗試期間,San Francisco 器由器的FastEthernet 接口fa0/1捕獲到一個幀。捕獲的幀中包含源IP 地址為10.10.1.2而目的IP 地址為10.31.1.20的數據包。捕獲該幀時,它的目的MAC 地址是什么?()

題型:單項選擇題

以下哪兩種介質可提供高達1Gb/s 的帶寬?()

題型:多項選擇題