A.Allow unrestricted access to the console or VTY ports.
B.Use a firewall to restrict access from the outside to the network devices.
C.Always use Telnet to access the device command line because its data is automatically encrypted.
D.Use SSH or another encrypted and authenticated transport to access device configurations.
E.Prevent the loss of passwords by disabling password encryption.
您可能感興趣的試卷
你可能感興趣的試題
A.IP
B.ICMP
C.TCP
D.UDP
A.ping
B.Telnet
C.FTP
D.TCP
E.IP
A.denial of service
B.brute force
C.reconnaissance
D.Trojan horse
A.This command should be executed from the global configuration mode.
B.The IP address 10.121.16.8 is the local router port used to forward data.
C.102 is the remote DLCI that will receive the information.
D.This command is required for all Frame Relay configurations.
E.The broadcast option allows packets， such as RIP updates， to be forwarded across the PVC
A.mismatched TKIP encryption
B.null SSID
C.cordless phones
D.mismatched SSID
E.metal file cabinets
F.antenna type or direction
最新試題
What is the subnetwork address for a host with the IP address 201.100.5.68/28?（）
A network administrator needs to configure a serial link between the main office and a remote location.The router at the remote office is a non-cisco router. How should the network administrator configure the serial interface of the main office router to make the connection?（）
Which Cisco IOS diagnostics command can disrupt the operation of a router under high-load conditions?（）
What is the result of issuing the frame-relay map ip 192.168.1.2 202 broadcast command?（）
An employee of ABC company has move to an office on a different floor. Although the administrator is able to telnet to all of the routers,the address of Switch F is needed in order to verify that the employee remains in the same VLAN.Which action could be used by the administrator to find the IP address of Switch F?（）
A network administrator is trying to add a new router into an established OSPF network.The networks attached to the new router do not appear in the routing tables of the other OSPF routers.Given the information in the partial configuration shown below,what configuration error is causing this problem?（）Router(config)#router ospf 1Router(config-router)#network 10.0.0.0 255.0.0.0 area 0
What is the purpose of the cisco Vlan Trunking protocol?（）
Which cisco ios command can help to determine the timing of various debug events,relative to each other,when you are debugging a complicated router issue?（）
Three switches are connected to one anther via trunk ports.Assuming the default switch configuration,which switch is elected as the root bridge for the spanning-tree instance of vlan 1?（）
Which encapsulation type is a Frame Relay encapsulation type that is supported by Cisco routers?（）