A.2031:0:130F::9C0:876A:130B
B.2001:0DB8:0000:130F:0000:0000:08GC:140B
C.2001:0DB8:0:130H::87C:140B
D.2031::130F::9C0:876A:130B

A.ARP
B.SSH
C.Telnet
D.WEP
E.SNMPv1
F.SNMPv2

A.Ensure that the Ethernet encapsulations match on the interconnected router and switch ports.
B.Ensure that cables A and B are straight-through cables.
C.Ensure cable A is plugged into a trunk port.
D.Ensure the switch has power.
E.Reboot all of the devices.
F.Reseat all cables.

A.configure static frame relay map entries for each subinterface network.
B.remove the ip address from the physical interface
C.create the virtual interfaces with the interface command
D.configure each subinterface with its own IP address
E.disable split horizon to prevent routing loops between the subinterface networks
F.encapsulate the physical interface with multipoint PPP

A.傳輸層把一個數據流分成段，并可以增加可靠性和流控制信息。
B.數據鏈路層增加物理源和目的地地址以及一個FCS字段。
C.當網絡層封裝源和目的地主機的地址和協議相關的控制信息的幀分組被創建。
D.當網絡層增加了第3層的地址和控制信息，以一個段分組被創建。
E.表示層轉換位成電壓為通過物理鏈路傳輸。