多項選擇題A network administrator wants to ensure that only the server can connect to port Fa0/1 on a Catalyst switch. The server is plugged into the switch Fa0/1 port and the network administrator is about to bring the server online. What can the administrator do to ensure that only the MAC address of the server is allowed by switch port Fa0/1?()

A.Configure port Fa0/1 to accept connections only from the static IP address of the server.
B.Employ a proprietary connector type on Fa0/1 that is incompatible with other host connectors.
C.Configure the MAC address of the server as a static entry associated with port Fa0/1.
D.Bind the IP address of the server to its MAC address on the switch to prevent other hosts from spoofing the server IP address.
E.Configure port security on Fa0/1 to reject traffic with a source MAC address other than that of the server.
F.Configure an access list on the switch to deny server traffic from entering any port other than Fa0/1.


您可能感興趣的試卷

你可能感興趣的試題

1.多項選擇題At which layers of the OSI model do WANs operate? (Choose two.)()

A.application layer
B.session layer
C.transport layer
D.network layer
E.datalink layer
F.physical layer

2.多項選擇題Which three statements describe the differences between RIP version 1 and RIP version 2? (Choose three.)()

A.RIP version 1 broadcasts updates whereas RIP version 2 uses multicasts.
B.RIP version 1 multicasts updates while RIP version 2 uses broadcasts.
C.Both RIP version 1 and RIP version 2 are classless routing protocols.
D.RIP Version 2 is a classless routing protocol whereas RIP version 1 is a classful routing protocol.
E.Both RIP version 1 and version 2 support authentication.
F.RIP version 2 sends the subnet mask in updates and RIP version 1 does not.

3.單項選擇題When a new trunk is configured on a 2950 switch, which VLANs by default are allowed over the trunk link?()

A.no VLANs
B.all VLANs
C.only VLANs 1 - 64
D.only the VLANs that are specified when creating the trunk

4.單項選擇題What is the function of the command switchport trunk native vlan 999 on a Cisco Catalyst switch?()

A.It creates a VLAN 999 interface.
B.It designates VLAN 999 for untagged traffic.
C.It blocks VLAN 999 traffic from passing on the trunk.
D.It designates VLAN 999 as the default for all unknown tagged traffic.

5.單項選擇題A Cisco router is booting and has just completed the POST process. It is now ready to find and load an IOS  image. What function does the router perform next?()

A.It checks the configuration register.
B.It attempts to boot from a TFTP server.
C.It loads the first image file in flash memory.
D.It inspects the configuration file in NVRAM for boot instructions.

最新試題

What is the subnetwork address for a host with the IP address 201.100.5.68/28?()

題型:單項選擇題

Three access ports have been installed and configured to a small office.What term defines the wireless topology?()

題型:單項選擇題

Which Cisco IOS diagnostics command can disrupt the operation of a router under high-load conditions?()

題型:單項選擇題

Which command encrypts all plaintext passwords?()

題型:單項選擇題

Which cisco ios command can help to determine the timing of various debug events,relative to each other,when you are debugging a complicated router issue?()

題型:單項選擇題

While troubleshooting a network problem,a technician discovers that the current copy of the Cisco IOS is outdated and needs to be updated.Which of the following commands would the technician issue to replace the Cisco router IOS with the newer version?()

題型:單項選擇題

If all OSPF routers in a single area are configured with the same priority value,what value dose a router use for the ODPF router ID in the absence of a loopback interface?()

題型:單項選擇題

Which IPsec security protocol should be used when confidentiality is required?()

題型:單項選擇題

The network administrator cannot to switch 1 over a telnet session,although the hosts attached to switch 1 can ping the interface Fa0/0 of the router.Given the information in the graphic and assuming that the router and switch2 are configured properly,which of the following commands should be issued on switch 1 to correct this problem?()

題型:單項選擇題

A network administrator is trying to add a new router into an established OSPF network.The networks attached to the new router do not appear in the routing tables of the other OSPF routers.Given the information in the partial configuration shown below,what configuration error is causing this problem?()Router(config)#router ospf 1Router(config-router)#network 10.0.0.0 255.0.0.0 area 0

題型:單項選擇題