A.ipv6 host
B.ipv6 unicast-routing
C.ipv6 local
D.ipv6 neighbor
您可能感興趣的試卷
你可能感興趣的試題
A.Executing password recovery is required.
B.The virtual terminal lines are misconfigured.
C.Use Telnet to connect to RouterA and then to NewSwitch to correct the error.
D.Power cycle of NewSwitch will return it to a default configuration.
Refer to the exhibit.This command is executed on 2960Switch:
2960Switch(config)# mac-address-table static 0000.00aa.aaaa vlan 10 interface fa0/1
Which two of these statements correctly identify results of executing the command?()
A.Port security is implemented on the fa0/1 interface.
B.MAC address 0000.00aa.aaaa does not need to be learned by this switch.
C.Only MAC address 0000.00aa.aaaa can source frames on the fa0/1 segment.
D.Frames with a Layer 2 source address of 0000.00aa.aaaa will be forwarded out fa0/1.
E.MAC address 0000.00aa.aaaa will be listed in the MAC address table for interface fa0/1 only.
A.255.255.255.240
B.255.255.255.254
C.255.255.255.252
D.255.255.255.0
E.255.255.255.248
A.A more efficient use of bandwidth can be achieved allowing many physical groups to use the same network infrastructure
B.Broadcast storms can be mitigated by decreasing the number of broadcast domains,thus increasing their size.
C.A higher level of network security can be reached by separating sensitive data traffic from other network traffic.
D.Port-based vlans increase switch-port use efficient,thanks to 802.1Q trunks
E.A more efficient use of bandwidth can be achieved allowing many logical networks to use the same network infrastructure.
F.Broadcast storms can be mitigated by increasing the number of broadcast domains,thus reducing their size.
G. VLANs make it easier for IT staff to configure new logical groups,because the vlans all belong to the same broadcast domain.
哪個目的地址將被用于主機A發送數據到主機C?()
A.交換機1的IP地址
B.交換機1的MAC地址
C.主機C的IP地址
D.主機C的MAC地址
E.路由器的E0接口的IP地址
F.路由器的E0接口的MAC地址
最新試題
請參見圖示。一臺路由器(其路由表如圖所示)收到發往192.168.1.4的數據包。路由器將如何處理該數據包?()
請參見圖示。某用戶想要查看當前的配置。圖中所示為ipconfig/all 命令的輸出。從此輸出可以得到哪三項結論?()
請參見圖示。從主機X 發出的到主機Y 的tracert 命令已成功。下列哪一項正確地反映了追蹤列表中顯示的中間網絡設備的順序?()
請參見圖示。主機X 和主機Y 與本地網絡的通信受到限制。此問題的原因是什么?()
請參見圖示。網絡中的所有設備均使用默認配置。此拓?fù)渲行枰嗌賯€(gè)邏輯地址范圍?()
請參見圖示。對于從主機A 向Web 服務器發出的網頁請求,正確的目的套接字?jǐn)?shù)字是什么?()
下列哪些是私有IP 地址的地址范圍?()
以下哪兩種介質可提供高達1Gb/s 的帶寬?()
請參見圖示。主機A 正在訪問多臺服務器。結合使用什么端口號和地址即可唯一識別特定服務器上運行的特定進程?()
請參見圖示。在網絡中,PC1向PC2發送了一條消息。PC2收到的幀如圖所示。該幀中的哪一信息確定了正確的目的應用程序?()