多項選擇題Two switches are connected through a trunk link.which two commands show that there is a native VLAN mismatch on that link?()

A.show interfaces interface
B.show vlan bri
C.show interfaces interface switchport
D.show interface interface trunk
E.show interfaces vlan


您可能感興趣的試卷

你可能感興趣的試題

1.單項選擇題

What is the most likely reason for the dispartly between the actual network numbers at the branches and the routes in the routing table on Gateway-Router?()

A.Branch-Router2 is configured to send both RIPv1 and RIPv2 updates.
B.Gateway-Router is configured to only receive RIPv2 updates.
C.Gateway-router is configured to receive only RIPv1 updates.
D.Branch-Router1 is configured to only send RIPv1 updates.

2.單項選擇題Which command is used to display the collection of OSPF link states?()

A.show ip ospf lsa database
B.show ip ospf link-state
C.show ip ospf neighbors
D.show ip ospf database

3.單項選擇題When you are troubleshooting an ACL issue on a router,which command can help you to verify which interfaces are affected by the ACL?()

A.show ip access-list
B.show access-list
C.list ip interface
D.show interface
E.show ip interface

4.多項選擇題

如圖,如果所有的鏈接都運行在相同的帶寬,哪些端口會被STP指定的端口?()

A. Switch A - Fa0/0
B. Switch A - Fa0/1
C. Switch B - Fa0/0
D. Switch B - Fa0/1
E. Switch C - Fa0/0
F. Switch C - Fa0/1

5.單項選擇題Three switches are connected to one anther via trunk ports.Assuming the default switch configuration,which switch is elected as the root bridge for the spanning-tree instance of vlan 1?()

A.the switch with the lowest MAC address
B.the switch with the higest MAC address
C.the switch witch the higest IP address
D.the switch with the lowest IP address

最新試題

何時必須使用clock rate 命令配置路由器串行接口?()

題型:單項選擇題

請參見圖示。從主機X 發出的到主機Y 的tracert 命令已成功。下列哪一項正確地反映了追蹤列表中顯示的中間網絡設備的順序?()

題型:單項選擇題

請參見圖示。一臺路由器(其路由表如圖所示)收到發往192.168.1.4的數據包。路由器將如何處理該數據包?()

題型:單項選擇題

請參見圖示。網絡中的主機A 正在向主機B 發送數據段。有關所交換的數據段的流量控制如圖所示。下列關于此通信的陳述,哪兩項是正確的?()

題型:多項選擇題

請參見圖示。網絡中的所有設備均使用默認配置。此拓?fù)渲行枰嗌賯€邏輯地址范圍?()

題型:單項選擇題

要將數據包發送到遠程網絡,應使用哪種設備?()

題型:單項選擇題

請參見圖示。主機B 嘗試與主機C 建立TCP/IP 會話。在嘗試期間,San Francisco 器由器的FastEthernet 接口fa0/1捕獲到一個幀。捕獲的幀中包含源IP 地址為10.10.1.2而目的IP 地址為10.31.1.20的數據包。捕獲該幀時,它的目的MAC 地址是什么?()

題型:單項選擇題

在路由器上使用Router#copy running-config startup-config 命令會產生什么效果?()

題型:單項選擇題

請參見圖示。主機A 和B 無法互相通信。此問題的原因是什么?()

題型:單項選擇題

請參見圖示。電纜1和電纜2分別按照特定的物理層要求接線。哪三個網段使用電纜2?()

題型:多項選擇題