A. NX-OS uses a random MAC address from the IEEE OUI block that is assigned to Cisco.
B. The VDC system MAC is pulled from the active supervisor and concatenated through a hash to ensure uniqueness.
C. NX-OS uses a value that is based on a range that is assigned to the SPROM of the system backplane.
D. The VDC system MAC is based on a range that is allocated to the first line card that is installed in the switch.
您可能感興趣的試卷
你可能感興趣的試題
A. The module is powered up， and interfaces are in an "admin down" state.
B. The module is denied power， and a syslog message is generated.
C. The module is powered up， and interfaces are allocated to VDC0.
D. The module is powered up， and interfaces are allocated to VDC100.
A. Compatibility with third-party Fibre Channel switches
B. Faster throughput
C. Reduce domain IDs in a Fibre Channel environment
D. Support for increased number of VSANs
E. Support for SAN port channels
A. manage SNMPv3 security access to switches
B. save and copy configuration files and software images
C. configure VLANs and Ethernet port channels
D. manage 2148T FEX， 2232PP FEX， and 2248TP FEX
E. configure FCoE
A. A single SAN port channel can have both Fibre Channel and virtual Fibre Channel interfaces.
B. SAN port channels can include up to 16 interfaces.
C. SAN port channels distribute traffic across all links in the port channel when source ID and destination ID load balancing are used.
D. The links in SAN port channels can be connected to different sets of switches.
E. The On mode of operation means ports only operate as part of a SAN port channel or remain inactive.
A. The Nexus 5000 family of switches does not support vPC when running in either NPV or FCoE NPV mode.
B. The MDS 9100 family of switches is an excellent design choice as a Unified Fabric edge switch.
C. The Nexus 7000 Series Switches can support the NPIV mode of operation， but cannot function as a complete Fibre Channel Forwarder.
D. The Nexus 7000 Series Switches cannot support advanced Cisco Fibre Channel features such as IVR.
E. The MDS family of Cisco Unified Fabric switches supports both the Fibre Channel Forwarder and Fibre Channel Bridge functions.
最新試題
In a Cisco Unified Computing System， What is the "designated receiver" port in end-host mode used for？（）
Which two statements about end-host mode in SAN connectivity in a Cisco UCS environment are true？ （）
Your company wants Server 1/eth0 （vNIC 1） configured so that it always uses Fabric Interconnect A Port Channel 1 （Po1） when it communicates with anything outside of the Cisco UCS domain. However， if vNIC 1 fails over to Fabric Interconnect B using fabric failover， then vNIC 1 can any uplink port on Fabric Interconnect B. Which statements are true？ （）
An administrator creates a vNIC and assigns it to Fabric A with the fabric failover feature enabled. Which statement is true？（）
Which GSS "source access list" is used to allow access to GSS by clients when GSS is being used as the DNS？（）
Given the following output： san-port-channel 12 is up Hardware is Fibre Channel Port WWN is 24：0c：00：0d：ec：d3：5c：00 Admin port mode is NP， trunk mode is on Port mode is NP Port vsan is 1 Speed is 8 Gbps Member[1] ： fc2/3 Member[2] ： fc2/4 What does "Speed is 8 Gbps" indicate？（）
From the Cisco UCS CLI， how do you verify which uplink ports a blade server is using for its network connectivity？（）
Refer to the exhibit. According to the equipment tab in Cisco UCS Manager， which is true？（）
What would be the cause for the following fault in UCS Manager？（） "ether VIF x / xxx down， reason： ENM source pinning failed"
A Cisco Application Control Engine Appliance （ACE） non-admin context does not support "sticky" configuration. What is the reason for this issue？（）