A.Existing Neighbors will immediately begin using the new metric.
B.Existing Neighbors will use the new metric after clearing the EIGRP Neighbors.
C.Existing Neighbors will resync, maintaining the neighbor relationship
D.All ecisting neighbor relationships will go down
您可能感興趣的試卷
你可能感興趣的試題
A.Increase the shaping rate for the priority queue.
B.Remove the policer applied on the priority queue.
C.Remove the shaper applied on the preiority queue.
D.Increase the policing rate for the priority queue.
A.IP PIM RP-address
B.IP PIM ssm
C.IP PIM Sparse-mode
D.IP PIM Passive
A.SMTP
B.ICMP
C.BGP
D.SSH
E.RTP
F.BitTorrent
G.VTP
A.232.0.0.0/8
B.239.0.0.0/8
C.232.0.0.0/4
D.FF3x::/32
E.FF2x::/32
F.FF3x::/16
最新試題
Which message type is constructed and sent from an MSDP router to its MSDP peers when it receives a PIM register message (knowing that the MSDP router is also configured as an RP for the PIM domain)?()
In which way can the IPv6 address of 2031:0000:130F:0000:0000:09C0:876A:130B be expressed most efficiently?()
IEEE 802.1w is a Rapid Spanning Tree Protocol (RSTP) that can be seen as an evolution of the 802.1 standard. What are the port roles described by 802.1w?()
f a Cisco switch is configured with VTPv1 in transparent mode, what is done with received VTP advertisements?()
For the following ports, which port is on every bridge in a Spanning Tree Protocol IEEE 802.1w network except the root bridge?()
Which statement is true of a source that wants to transmit multicast traffic to group 239.1.1.1?()
Which statement best describes OSPF external LSAs (type 5)?()
What are the "bound IP addresses" used for in LDP?()
Which statement is correct about an OSPF sham-link?()
Multicast is being deployed in the network, and only ip pim sparse-dense mode has been configured on all interfaces in the network to support a new video streaming application. No other multicast configuration was applied anywhere in the network. Since enabling multicast, the network monitoring tools show periodic spikes in link utilization throughout the network, even in areas where the video application is not being used. What could be a possible cause?()