A.VRF definition for IPv6
B.MP BGP for IPv6
C.LDP
D.VRF-enabled routing protocol
E.VRF-enabled interface
您可能感興趣的試卷
你可能感興趣的試題
A.Out-of-profile packets are queued.
B.It causes TCP retransmits.
C.Marking and remarking are not supported.
D.It does not respond to BECN and foresight messages.
E.It uses a single- and two-bucket mechanism for metering.
A.change the EtherChannel default hashing algorithm from XOR to use source port Layer 4 port load balancing to better load balance the traffic
B.change the EtherChannel default hashing algorithm from XOR to use destination Layer 4 port load balancing to better load balance the traffic
C.have the application recoded to use multiple connections instead of a single connection so EtherChannel can better load balance the traffic
D.upgrade the CPU and memory of the compute devices so they can better process traffic
E.upgrade the EtherChannel bundle to a single gigabit link because EtherChannel is not well suited for single-connection traffic
A.the table of 4096 elements that map the respective VLAN to STP instance number
B.VTP version
C.configuration revision number
D.native VLAN ID
A.PIM sparse mode is being used.
B.PIM dense mode is being used.
C.The BGP multicast address family has not been configured.
D.IGMP version 3 is being used.
E.IP PIM neighbor filters have not been applied.
A.The phones are not sending traffic with the correct DSCP value.
B.The Cisco CallManager is not marking the traffic correctly.
C.This is most likely a bug on the CE routers.
D.Your LAN QoS is incorrectly configured.
最新試題
What is the command to configure RSVP to reserve up to one-tenth of a Gigabit link, but only allow each individual flow to use 1 MB/s?()
Which router is doing LSA type 7 to type 5 translation,and why?()
For the following items,what is the mathematical relationship between the committed information rate (CIR), committed burst (Bc), and committed rate measurement interval (Tc)?()
Two directly connected routers, R1 and R2, are both configured for OSPF graceful restart. R2 is able to switch packets in hardware, but R1 is not. If a network administrator logs on to R2 and performs a system reload, which will be the result?()
Which switch port error is an indication of duplex mismatches on 10/100/1000 IEEE 802.3u Gigabit Ethernet ports?()
Multicast is being deployed in the network, and only ip pim sparse-dense mode has been configured on all interfaces in the network to support a new video streaming application. No other multicast configuration was applied anywhere in the network. Since enabling multicast, the network monitoring tools show periodic spikes in link utilization throughout the network, even in areas where the video application is not being used. What could be a possible cause?()
Which IOS security feature is configured by the ip inspect inspection-name {in out} command?()
Policy-based routing allows network administrators to implement routing policies to allow or deny paths based on all of these factors except which one?()
When two bridges are competing for the root bridge of an IEEE 802.1D spanning tree and both have the same bridge priority configured, which parameter determines the winner?()
Which two attributes need to match for two switches to become members of the same MST region? ()