A. Create a class that inherits HtmlTextWriter and that can emit the new markup.
B. Create a class that inherits StreamWriter and that can emit the new markup.
C. Reference the class in the <capabilities> element of the new device's browser definition file.
D. Reference the class in the <controlAdapters> element of the new device's browser definition file.
您可能感興趣的試卷
你可能感興趣的試題
A. The access layer is the first oversubscription point in a data center design.
B. When using a Layer 2 loop-free design, VLANs are extended into the aggregation layer.
C. When using a Layer 2 looped design, VLANs are not extended into the aggregation layer.
D. When using a Layer 3 design,stateful services requiring Layer 2 connectivity are provisioned from the aggregation layer.
E. The data center access layer provides the physical-level connections to the server resources and only operates at Layer 3.
A. Partitioning of network resources is enabled.
B. VRFs cannot support path isolation from MAN/WAN designs.
C. VRFs cannot be used to map a virtualized data center to a MPLS implementation.
D. VRFs do not allow for the use of application services with multiple access topologies.
E. An access design using a VRF allows for an aggregation layer service module solution.
A. Troubleshooting is more complicated.
B. Service and switch modules are underutilized.
C. Layer 2 adjacency is required with the servers that use this design.
D. Layer 3 adjacency is required with the servers that use this design.
E. Load balancing will always occur across both access layer uplinks.
A. Summarize data center subnets.
B. Use passive interfaces to ensure appropriate adjacencies.
C. Tune the EIGRP timers to enable EIGRP to achieve quicker convergence.
D. Adjust the default bandwidth value to ensure proper bandwidth on all links.
E. Advertise a default summary route into the data center core from the aggregation layer.
A. Never use passive interfaces.
B. Use NSSA areas from the core down.
C. Use totally stub areas to stop type 3 LSAs.
D. Use the lowest Ethernet interface IP address as the router ID.
E. Tune OSPF timers to enable OSPF to achieve quicker convergence.
最新試題
What is the recommended radius of a cell for a voice-ready wireless network?（）
What will an Easy VPN hardware client require in order to insert its protected network address when it connects using network extension mode?（）
Cisco Express Forwarding (CEF) is mainly used to increase packet switching speed, reducing the overhead and delays introduced by other routing techniques, increasing overall performance.Which of the following concerning CEF is recommended by Cisco?（）
During consultation, you find that a customer has only a single asset closet and is looking for a solution that is easy to deploy. Which NAS physical deployment model would you suggest to this customer?（）
Which of the following is the primary consideration to scale VPNs?（）
One of your customers has deployed a Layer 3 gateway in the untrusted network. Which gateway mode is appropriate for this customer?（）
You are the network consultant from pass4sure.com. One of your customer has six sites, three of which process a large amount of traffic among them. He plans to grow the number of sites in the future. Which is the most appropriate design topology?（）
During consultation, you find that a customer has multiple asset closets and will be adding more in the future. Which NAS physical deployment model would you suggest to this customer?（）
Please match the Cisco STP enahancement term to its definition.（）(1) BPDU guard(2) PortFast(3) BackboneFast(4) Loop guard(5) Root guard(a) shuts down a port that receives a BPDU when enabled(b) cuts convergence time by mas-age for indirect failure(c) prevents the aliernate or root port from being designated in absence of BPDUs(d )causes Layer 2 LAN interface access port to immediately enter the forwarding state(e) helps prevent bridging loops due to jni-directional link failures on point-to-point links
Which signal and noise values will result in the best phone communication with an access point?（）