A standalone wireless AP solution is being installed into the campus infrastructure. The access points appear to boot correctly， however， wireless clients are not obtaining correct access. You verify that the local switch configuration connected to the access point appears as the following：
interface ethernet 0/1
switchport access vlan 10
switchport mode access
spanning-tree portfast
mls qos trust dscp
What is the most likely issue causing the problem？（）
A.QoS trust should not be configured on a port attached to a standalone AP.
B.QoS trust for switchport mode access should be defined as "cos".
C.switchport mode should be defined as "trunk" with respective QoS.
D.switchport access vlan should be defined as "1".
您可能感興趣的試卷
你可能感興趣的試題
A campus infrastructure supports wireless clients via Cisco Aironet AG Series 1230， 1240， and 1250 access points. With DNS and DHCP configured， the 1230 and 1240 access points appear to boot and operate normally； however， the 1250 access points do not seem to operate correctly.
What is the most likely issue causing this problem？（）
A.PoE
B.DHCP with option 150
C.DHCP with option 43
D.DNS
E.switch port does not support gigabit speeds
You work as a network engineer for . You study the exhibit carefully.
What happens when the switch 2 is connected to the rest of the network in the VTP domain Lab_Network？（）
Exhibit：
A.The recently introduced switch 2 removes all configured VLANs throughout the VTP domain.
B.The recently introduced switch 2 creates a STP loop in the VTP domain.
C.The recently introduced switch 2 switches over to VTP transparent mode in order to be included into the VTP domain.
D.A trunk should be configured between the two switches in order to integrate 2 into the VTP domain.
E.The recently introduced switch 2 adds one more VLAN to the VLAN database in the VTP domain.
Exhibit：
You work as a network administrator at.You study the exhibit carefully. Three different wireless groups of users （support， staff， guests） are permitted to access the wireless LAN.
Which security policy should be implemented for the users in the guests group？ （）
A.LEAP authentication
B.Primary SSID with open or no WEP authentication
C.Static WEP and authentication
D.Open authentication with WEP plus MAC authentication
You work as a network administrator at， You have been asked to configure 802.1x port-based authentication. You notice that the client workstation is not compatible with 802.1x port-based authentication.
What supported authentication server should be chosen？（）
A.TACACS with LEAP extensions
B.RADIUS with EAP extensions
C.TACACS+
D.LDAP
You work as a network engineer for . You study the switch exhibit carefully.
Which two statements are true？ （）
Exhibit:
A.The trust boundary is not on this switch.
B.It is displaying the AutoQos configuration that was initially applied.
C.Interface Fa0/3 trusts allCoS values.
D.The switch does not trust theCoS values of a Cisco IP phone attached to port Fa0/3.
E.The show auto qos command shows the user-defined QoS settings.
F.The show auto qos command does not display user configuration changes currently in effect.
最新試題
Refer to the exhibit. Initially， LinkA is connected and forwarding traffic. A new LinkB is then attached between SwitchA and HubA. Which two statements are true about the possible result of attaching the second link？（）
If G1/0/1 on DS1 is shutdown， what will be the current priority value of the Vlan105’s group on DS1 ？（）
Based on the show spanning-tree vlan 200 output shown in the exhibit， which two statements about the STP process for VLAN 200 are true？ （）
Refer to the exhibit. What command was issued on the Layer 3 switch Sw1 between Exhibit #1 and Exhibit #2？（）
Which option correctly identifies the Cisco IOS switching methods in descending order from the fastest method to the slowest method？（）
What two things will occur when an edge port receives a BPDU？（）
Which three statements are true of the Link Aggregation Control Protocol （LACP）？（）
During routine maintenance， it became necessary to shutdown G1/0/1 on DS1 and DS2. All other interface were up. During this time， DS1 became the active device for Vlan104’s HSRP group. As related to Vlan104’s HSRP group. What can be done to make the group function properly ？ （）
Which two statements about the various implementations of STP are true？（）
Refer to the exhibit. The command switchport mode access is issued on interface FastEthernet0/13 on switch CAT1. What will be the result？（）